

The VHF transmission system is a device used in antenna feeding systems. It can combine multiple RF signals from channel equipment into a single signal and then transmit it to the antenna. This transmission system uses an efficient heat dissipation design, with all components integrated onto a heatsink, effectively enhancing heat dissipation efficiency. As a result, not only can the transmission power be increased, but multiple high-power signals can also operate normally at the same time. According to customer requirements, a fan cooling function can also be added to this system.
The operating frequency band, number of channels, and power capacity can all be customized.
Operating temperature: -30°C to 75°C.
| Model No. | Frequency range(MHz) | Bandwidth(MHz) | Port lsolation(Min) | Reverse Isolation(Min) | VSWR | Input Power(W/CH) | Insertion Loss(dB) |
| 1U-TS-136-174-XX-21-01 | 136-174 | 2 | TX-TX 70dB | ANT-TX 50dB | 1.3 | 50 | 4.2 |
| 1U-TS-136-174-XX-31-01 | 136-174 | 2 | TX-TX 70dB | ANT-TX 50dB | 1.3 | 50 | 7.2 |
| 1U-TS-136-174-XX-41-01 | 136-174 | 2 | TX-TX70dB | ANT-TX 50dB | 1.3 | 50 | 7.2 |
| 1U-TS-136-174-XX-51-01 | 136-174 | 2 | TX-TX70dB | ANT-TX 50dB | 1.3 | 30 | 10.0 |
| 3U-TS-136-174-XX-51-01 | 50 | ||||||
| 1U-TS-136-174-XX-61-01 | 136-174 | 2 | TX-TX70dB | ANT-TX 50dB | 1.3 | 30 | 10.0 |
| 3U-TS-136-174-XX-61-01 | 50 | ||||||
| 1U-TS-136-174-XX-71-01 | 136-174 | 2 | TX-TX70dB | ANT-TX 50dB | 1.3 | 25 | 10.5 |
| 3U-TS-136-174-XX-71-01 | 50 | ||||||
| 1U-TS-136-174-XX-81-01 | 136-174 | 2 | TX-TX70dB | ANT-TX 50dB | 1.3 | 25 | 10.5 |
| 3U-TS-136-174-XX-81-01 | 50 | ||||||
| Model rules: size-product category TS-start frequency-stop frequency-power-number of combined circuits-version number | |||||||