

The frequency combiner is widely used in relay stations of various communication networks and is also suitable for various public and private mobile communication networks. This device can connect 2 to 16 base station transmitters to the same transmitting antenna. As a result, it not only saves the cost of constructing antennas, feeders, and base station towers, but more importantly, since the device uses high-Q resonant cavities and ring isolators among other components, it can effectively suppress out-of-band noise and higher-order harmonics generated by the transmitters, thereby improving the purity of the transmitted signals. It fundamentally solves the intermodulation interference problems that are difficult to address in multi-antenna systems.
There are multiple customizable frequency options available, and these frequency solutions have the advantages of low temperature drift, low insertion loss, minimal intermodulation interference, and high isolation.
Advantages:
Main frequency bands: 136-174MHz / 330-520MHz / 851-869MHz
Temperature drift and power drift <20kHz
Insertion loss for all four channels across the full temperature range is less than 3.0 dB
Input VSWR is less than 1.3
PIM < -140dBc @ 2*43dBm
The product has a high power output capability of 200 watts or more.
Tuning range: 2 MHz for VHF bands, 5 MHz for UHF bands
Regardless of the number of channels and frequencies, the product can be customized according to customer requirements.
| Item | Technical |
| Frequency | 136-174Mhz |
| Frequency Separation | ≥250KHz |
| Tuning Range | 2Mhz |
| Isolation TX-TX | ≥55dB |
| Isolation TX-ANT | ≥50dB |
| Input VSWR | ≤1.3 |
| Output VSWR | ≤1.8 |
| Input Power | 75W(Per Channel) |
| Temperature | -30 to +60 ℃ |
| Connector Type | N-Female,50Ω |
| Weight | < 9 Kg/Channel |
| Color | Oxidation Color |
Number of Channel | Insertion Loss | Size | ||
| 136-174MHz | Width | Height | Depth | |
| 2 | ≤3.0dB | 362 mm | 180 mm | 732 mm |
| 3 | ≤3.2dB | 362 mm | 362 mm | 732 mm |
| 4 | ≤3.5dB | 362 mm | 362 mm | 732 mm |
| 6 | ≤3.8dB | 362 mm | 544 mm | 732 mm |
| 8 | ≤4.1dB | 362 mm | 726 mm | 732 mm |
Note:
1. It is recommended that the channel spacing be greater than 250K, otherwise the standing wave of some antenna ports may exceed 1.8;
2. The above indicators are formulated based on the interval ≥ 250KHz. If the interval is 150 KHz ≤ interval ≤ 250KHz, some indicators will be affected; if the interval is less than 150K, the channel interval cannot be combined;