Repeaters are usually used in conjunction with microcell base stations or relay devices to address the problem of insufficient indoor signal coverage. They adopt a dual-port full-duplex design, come with a built-in power supply, are easy to install, and have high reliability. In addition, they are compatible with both digital systems and can also be used with analog systems.
They have the advantages of being lightweight, compact, and easy to install.
The operating frequency band can be customized according to customer needs.
| Frequency Range | Uplink: 330~520MHz | Downlink:330~520MHz |
| Working bandwidth | <5MHz | <5MHz |
| Duplex interval | >5MHz | >5MHz |
| Gain | 45±2dB / 50±2dB | 45±2dB / 50±2dB |
| Gain adjustment range | 30dB in 1dB Step | 30dB in 1dB Step |
| In-band fluctuations | ≤±1.5dB | ≤±1.5dB |
| Output Power | 3dBm | 37dBm(5W)/ 43dBm(20W) |
| In-band intermodulation attenuation | ≤-45dBc | ≤-45dBc |
| Stray | ≤-36dBm@9KHZ~1GHz; ≤-30dBm@1GHz~12.75GHz | |
| ALC starting control depth | 20dB | 20dB |
| VSWR | ≤1.5:1 | ≤1.5:1 |
| Group delay | ≤2.5us | ≤2.5us |
| Noise Figure @Maximum Gain | ≤5dB | --- |
| Impedence | 50Ω | |
| Local monitoring | RS232 | |
| Remote monitoring (optional) | GSM SMS modem or Ethernet | |
| Powered by | 110VAC or 220V AC(±15%),50~60Hz | |
| Power consumption | ≤90watts | |
| Mean time between failures (MTBF) | 50,000 hours | |
| IP protection level | IP65 | |
| Heat dissipation | Natural heat dissipation | |
| Working temperature range | -20~+55°C | |
| Working humidity range | 0~95%(non-condensing) | |
| Monitoring protocol requirements | Meet China Mobile network management agreement requirements | |
| Mechanical dimensions (L*W*H) | 440mm*300mm*170mm / 530mm*300mm*170mm | |
Contact Phone:
0755-26701085 0755-26701002
Company Address ：2nd Floor, Building A, Juchuang Jingu Creative Park, Xili Street, Nanshan District, Shenzhen